SMP-xx 1RU

SMP-xx 1RU

Fully Featured Multiviewer in a 1RU Chassis
The SMP-xx is a flexible multiviewer which lets you monitor a wide range of both video and audio sources on one or two independent displays up to 4K30Hz output resolution. 

The 1RU frame consists of 6 modular slots, 2 of which are reserved for the Network and Control output cards. Video or audio input or output cards are available for the other 4 slots. Up to 2 independent dual output MultiViewer instances can be added to the 1RU SMP-xx frame. To see examples which can be acheived with a SMP-xx click here to download the configuration document. 

The SMP-xx offers a vast range of features, including tally support, sophisticated Video/Audio/Metadata alarms, Under Monitor Display, Genlock input, multiple clocks and timers, etc. The Multi-viewer software features entirely customizable PIP sizes, integrated audio metering, border/tally and UMD support. 

This offers a sophisticated and entirely configurable ability to create layouts to best fit your production environments. The software is offered free of charge, including future updates for the lovgevity of the product. For more information see the User Manual here.

Future expansion is easy with the SMP-xx - additional video or audio input cards can be added in the future up to the frames capacity if required. Alternatively, if the 1RU SMP-xx frame is currently being used, and the input requirements expands that frame, the same cards can be used in the MP-xx frame to expand your system.

Need routing? The SMP-xxR offers a Multiviewer with integrated Router. See more 

MODULAR DESIGN 

  • Compact 1RU Frame - ideal for OB Vans, or other space retricted application 
  • Modular design - offers a wide range of input / output solutions 
  • Redundant power supply  to power up to 3 independent units

FULLY FEATURED LAYOUT DESIGN

  • Control & Setup via LAN - comprehensive and easy to use browser based control via GUI 
  • Ultimate level of layout flexability with entirely customizable PIP sizes
  • UMD entered via keyboard, LAN or serial cable 
  • Alarms for video, audio and metadata with outputs to GPI O/Ps, LAN and/or SNMP traps
  • Assignable tallies via Open or TSL protocol using serial or IP connection
  • NTP and Local Clocks and Timers
  • Free-form scale & position - all video / audio tiles are fully customizable in scale and position and offer the choice to maintain, or deviate from standard aspect ratio. 

MONITORING AND ALARMS

  • Embedded Audio Metering - Meter up to 16 channels of embedded audio per input via standard balistically correct scales (E.g BBC PPM, Nordic PPM, Extended VU)
  • Audio metering may be sourced from SDI embedded audio groups (PCM or Dolby-E metadata meter segment), or externally via optional analogue and AES/EBU inputs with sample rate conversion)
  • Fully configurable audio metering up to 32 channels per video tile with left/right or split meters. 
  • Analog and digital clocks controlled by LTC input or NTP (Network protocol)
  • Teletext subtitles display (WST on SD-SDI or OP-47 on HD-SDI)
  • GV SW-P-O2, SW-P-08 and RollCall control

VIDEO INPUTS

  • Up to 16 3G/HD/SD-SDI 3G-SDI

VIDEO OUTPUTS

  • FHD60 when using MVC Video Output Card
  • UHD30 when using MVC2-LV

MECHANICAL

  • 1U high 19" Rack mounting Frame with removable front panel, temperature controlled fan assisted ventilation, 6 card slots, seperate rear connector modules and power supply / fan status indicators. 
  • Outline Dimensions ~ 445mm(W) x 511mm(D) x 44mm(H)
  • Weight: 6kg (Full frame)

ENVIRIMENTAL

  • Operating Temperature: 0°C - 40°C
  • Relative Humidity: 70% max, non-condensing
  • Ventilation: Fan assisted. Front Inlet, rear exhaust

The SMP-xx frame works on a slots sytem - with 4 slots allocated for Video Processing Cards - 4, 8, 12 or 16 input multiviewers can be easily configured. Analogue or digital input and output cards can also be added. 


To see examples which can be acheived with a SMP-xx download the document below:

MV CONFIGURATIONS

Share by: